FS-Thermoscan - Thermography and cavity detection

All of our metal detectors and geophysical detecting instruments are part of the "FS - Future Series", a line of our latest technology to detect buried objects and underground structures. Beside the measuring instruments it includes our 3D software which assures a detailed analysis of the measured results.

Cavity detection device
Cavity detection device
Via analog display the measured values will be presented to the user
Via analog display the measured values will be presented to the user
FS-Thermoscan: Focus on it and measure it
FS-Thermoscan measures surface temperature also from great distances

FS-Thermoscan is a measuring device to detect differences in temperatures of the environment. So it can identify cold and warm areas of a field and conclusions concerning hidden objects and structures are possible. FS-Thermoscan is usable as a stand-alone device or can be connected to the Earth Imager eXp 4000 and eXp 5000. In that way it is even possible to get 3d graphics out of the measure values.

Possible applications are

  • the detection of cavities (caves, tunnels, chambers, chests, ...),
  • the visualization of the distribution of temperatures as well as
  • the measurement if differences in temperatures.

The FS-Thermoscan stands up for its usage and compact design. Create high resolution 3d graphics of the underground by measuring the differences in temperature on the surface of the ground.

FS-Thermoscan: Connected to eXp 4000 it creates also 3d graphics
FS-Thermoscan: Connected to eXp 4000 it creates also 3d graphics

Tested and certified by one of theleading technical experts in GermanyView Certificate
Tested and certified by one of the
leading technical experts in Germany

View Certificate

Compliance with the CE policies
Compliance with the CE policies

Because of the integrated laser pointer pinpointed measurements are possible. The device works contactless and therefore a field can also be researched from far distances. This is an important advantage if the field is impassable by the searcher.

FS-Thermoscan as
stand-alone device
FS-Thermoscan as additional
device for eXp 4000 and eXp 5000
Analog display Yes Yes
Digital display
and diagrams
No Yes
External power supply Yes Yes
also direct power supply via
eXp 4000 / eXp 5000
Display of differences in temperatures Yes Yes
Detection of
Yes Yes
3d infrared image No Yes
dimensions of detected cavities are available by using the software

The following technical indications are medial values. During operation small variations are quite possible.

Control unit

Operating temperature   0 °C - 70 °C
Storage temperature   -20 °C - 60 °C
Air humidity   5 % - 75 %
Waterproof   No
Dimensions (H x W x D)   35 x 12 x 22 cm
Weight   about 0.9 kg
Voltage   12 VDC

Laser Pointer

Laser Class   2 (according to EN 60 825-1)
Range   up to 50 m
Wavelength   630 – 680 nm
Maximum Output   < 1 mW

Measurement Readings

Optimal Surface Temperature   10 °C – 25 °C
Distance/Spot Size Ratio   8 : 1
Field Of View (Flare Angle)   7 °
Resolution   0,01 °C
Temperature Difference (min. amplification)   9 °C
Temperature Difference (max. amplification)   1 °C

In the following table you can see the complete delivery contents and all optional accessories.
The used symbols have the following signification:

x times includedx   = x times included   not included   = not included   optional available, only for additional charge   = optional available, only for additional charge

Control unit Yes1
Power Pack incl. charger and travel adapter Yes1
User's manual Yes1
Waterproof and shock resistant Peli case Yes1

You need a good metal detector?
Ask for help!

Phone: +49 (0)3447 4993000       E-Mail: info@okm-gmbh.de

OKM Logo
Other languages
© 2001 - 2017, OKM GmbH, All rights reserved.
All words and photographs are protected by copyright unless otherwise noted. Any use or retransmission of text or images on this website without written consent of the copyright owner constitutes copyright infringement and is prohibited.