Bionic X4 - Long range gold detector with Android Smart Phone
The Long Range is used to find buried objects at long distances. By using cross pinpointing the exact position of the located object can be determined.
The Bionic X4 gold long range detector has been developed especially for gold seekers, gold prospectors and treasure hunters, who are looking for gold at far distances. Unlike traditional long range detectors the Bionic X4 can be combined with an Android Smart Phone to visually locate gold targets.
The fully automated Bluetooth connection between the Smart Phone and Bionic X4 transfers scan data directly to the Smart Phone where the data is mapped to the display. So the treasure hunter is able to see the bearing, direction and image through the Smart Phone's camera and fix it for later analysis.
Detection methods for gold hunting
The Bionic X4 long range gold detector supports two different detection methods to locate hidden gold treasures:
- Ionic Detection Method (Ions-Chamber-System)
The Ionic Detection Method measures the ions radiation (ions absorbent) of buried gold objects. This detection method is only able to locate long time buried gold artifacts.
- Bionic Detection Method (Bio-Energy-System)
During the detection of gold the Bionic Detection Method interacts with the Bio-Energy of the operator's body to analyze minimum changes of object substances. Thereby the Bionic X4 gold detector is able to locate almost all gold objects. Independent of the age of the gold, the Bio-Energy-System can be used to find freshly buried gold, long time buried gold as well as golden artifacts that are not buried.
Typical applications of gold hunting
Due to the dual scan methods the Bionic X4 gold detector is usable for many tasks like gold prospecting. The main applications of this gold long range detector are:
- Detection of buried gold, i.e. gold jewelry, gold statues, gold rings, gold coins or gold bars (gold bullions)
The Bionic X4 gold detector works not only in dry grounds, it is also suitable for humid places, wet soils and can be used after rainy days without any limitations.
The Bionic X4 gold long range detector reaches best performances in sparsely populated areas. Since the Bionic X4 is very sensitive to changes of the ionic and bionic fields, the accuracy increases greatly in undisturbed or undeveloped areas.
Features and characteristics
In addition to both detection methods for gold hunting, the Bionic X4 is equipped with some additional features and functions including:
- Power Pack for up to 16 hours operating time (continuous operation)
- LED lights for night searches (also usable as flashlight)
- Laser pointer for directional reference (especially at night)
- Wireless stereo headphones
- Easy to read illuminated LED display
- Shock resistant and waterproof Peli transportation case including wheels and retractable handle for easy transportation
The smart phone's user interface and the OKM application is available in the following languages:
- English, Français, Deutsch, Español, Ελληνικά, Türkçe, Italiano, Nederlands, Pусский, فارسی, عربي
Using the included Android Smart Phone increases the Bionic X4 functionality and ease of use:
- Digital compass for navigation (directional reference)
- Optical fixation of detection direction
- Visual focusing of targets
On-site gold hunting with Bionic X4
The Bionic X4 gold long range detector and all of our other Long Range detectors are especially used for a fast research and prospecting, to explore areas where hidden gold treasures may be buried. It can be used for a first quick examination of an unknown terrain to find places of interest and buried gold treasures, so it is advisable for gold prospectors and treasure hunters who don't have any clue where to start detecting. The gold prospector can easily and quickly get a general overview of large areas.
The Bionic X4 is especially designed for inaccessible areas where it is hardly possible to walk. Reasons can be accrued forests, rocky mountains or rock faces.
The treasure hunter will use the Bionic X4 gold detector to scan the horizon and find a direction where a higher probability of gold objects could be buried. As soon as the gold direction has been determined, the permanent acoustical signal of the detector will change and the detected direction can be fixed within the display of the Android Smart Phone.
To find out the exact position of the gold you have to process a triangulation bearing with the Bionic X4 gold detector. Therefor you have to scan from at least two or more different directions and check if the detector is always responding to gold. As soon as you confirm two or more positive signals, the point of intersection from all directions marks your potential place of gold.
Bionic X4 and Rover UC savings package
Since the Bionic X4 gold long range detector is not able to make any indications about depth and size of the buried gold objects, it is recommended to use another 3d ground scanner to conduct a detailed ground scan analysis. A very good choice is the Rover UC which also uses the Android Smart Phone as controller and field data analyzer.
By using the Bionic X4 you can locate the place where a high probability of gold may be buried under the ground and the Rover UC can detect the exact position and dependent on the ground conditions the depth and size of the gold artifacts or items of great value.
Here we present some relevant discoveries, which have been located. If you also made a discovery or know somebody who made a fantastic find with our metal detectors, just write us an email or use our online form!
In the following table you can see the complete delivery contents and all optional accessories. The used symbols have the following signification:
|Power Pack incl. charger and travel adapter||1|
|Smart phone incl. headphones, USB cable and charger||1|
|Waterproof and shock resistant Peli case||1|
|Wireless headphones incl. batteries||1|
The following technical indications are medial values. During operation small variations are quite possible.
- Operating temperature
- 0 °C - 70 °C
- Storage temperature
- -20 °C - 60 °C
- Air humidity
- 5 % - 75 %
- Dimensions (H x W x D)
- 260 x 140 x 220 mm
- about 780 g
- 12 VDC
- Operating Time (without smart phone at USB)
- about 16 hours
- Operating Time (smart phone at USB)
- about 8 hours
- Atmel AtMega CPU, 14,7 MHz
- OLED Display
- accustical, visual
- Laser beam distance
- max. 150 m
- Laser output
- max. 3 mW
- Emitted wavelength
- 650 nm
- Laser class
- 3R (EN 60825-1:2007)
- Operating temperature
- 15 °C - 35 °C
Data transmission (Bluetooth)
- 2.4 – 2.4835 GHz
- Maximum Transfer Rate
- 1 Mbps
- Receiving Sensitivity
- -85 dBm
- Maximum Range
- approx. 10 m
This page has been voted 3.5 of 5 stars (77 votes).
Share this page with your friends on