We don't manufacture this product anymore.
FS-Thermoscan - Thermography and cavity detection
All of our metal detectors and geophysical detecting instruments are part of the "FS - Future Series", a line of our latest technology to detect buried objects and underground structures. Beside the measuring instruments it includes our 3D software which assures a detailed analysis of the measured results.
FS-Thermoscan is a measuring device to detect differences in temperatures of the environment. So it can identify cold and warm areas of a field and conclusions concerning hidden objects and structures are possible. FS-Thermoscan is usable as a stand-alone device or can be connected to the Earth Imager eXp 4000, eXp 5000 and eXp 4500. In that way it is even possible to get 3d graphics out of the measure values.
Possible applications are
- the detection of cavities (caves, tunnels, chambers, chests, ...),
- the visualization of the distribution of temperatures as well as
- the measurement if differences in temperatures.
The FS-Thermoscan stands up for its usage and compact design. Create high resolution 3d graphics of the underground by measuring the differences in temperature on the surface of the ground.
Because of the integrated laser pointer pinpointed measurements are possible. The device works contactless and therefore a field can also be researched from far distances. This is an important advantage if the field is impassable by the searcher.
|FS-Thermoscan as additional|
device for eXp 4000 and eXp 5000
|External power supply|
also direct power supply via
eXp 4000 / eXp 5000
|Display of differences in temperatures|
|3d infrared image|
dimensions of detected cavities are available by using the software
In the following table you can see the complete delivery contents and all optional accessories. The used symbols have the following signification:
|Power Pack incl. charger and travel adapter||1|
|Waterproof and shock resistant Peli case||1|
The following technical indications are medial values. During operation small variations are quite possible.
- Operating temperature
- 0 °C - 70 °C
- Storage temperature
- -20 °C - 60 °C
- Air humidity
- 5 % - 75 %
- Dimensions (H x W x D)
- 35 x 12 x 22 cm
- about 0.9 kg
- 12 VDC
- Laser Class
- 2 (according to EN 60 825-1)
- up to 50 m
- 630 – 680 nm
- Maximum Output
- < 1 mW
- Optimal Surface Temperature
- 10 °C – 25 °C
- Distance/Spot Size Ratio
- 8 : 1
- Field Of View (Flare Angle)
- 7 °
- 0,01 °C
- Temperature Difference (min. amplification)
- 9 °C
- Temperature Difference (max. amplification)
- 1 °C
This page has been voted 3.7 of 5 stars (14 votes).
Share this page with your friends on